Do it yourself
Frequently asked questions about cars and motorcycles

Model: Yamaha Yz 250f
Part: Engine oil

It will be possible to perform the oil replacement of the Yamaha YZ 250F by loosening the drain plug of the oil pan located in the central lower part of the vehicle: once the plug is removed, it will be possible to collect all the used oil inside a properly positioned container. When the oil has completely drained, it will be possible to remove the oil filter located in the lower part of the motorcycle. At this point, it will be possible to top up the oil from the vent located on the right side of the vehicle.

Posted on 19 April 2025 by ScegliAuto

Video tutorial

Related tutorials

Yz 250f In this guide, discover the procedure that will allow you to perform the routine maintenance service by replacing the engine oil and oil filter on th…
Yz 250f In order to disassemble the engine of the Yamaha YZ 250F, you need to loosen the screws that fix the block to the appropriate supports: then you will…
Yz 250f To replace the clutch of the Yamaha YZ 250F, you will need to loosen the screws that secure the special cover casing located on the right side of the…

How to Service the Beta RR 350

This video will illustrate the steps to perform the routine maintenance service, replacing the engine oil and oil filter on the Beta RR 350 enduro bike. First, place the bike on a stand and start by loosening the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then clean the small oil filter (replacing it with a new one if too dirty). Finally, top up with new oil, of the correct type for your engine, filling to the maximum level!

Watch the video!


by ScegliAuto

More videos