Do it yourself
Frequently asked questions about cars and motorcycles
  1. Motorcycles
  2. :
  3. Yamaha
  4. : Sniper 150

How to change the engine oil of a Yamaha Sniper 155?

Model: Yamaha Sniper 150
Part: Engine oil

Video tutorial

To change the engine oil of a Yamaha Sniper 155, start by warming up the engine for a few minutes to make the oil more fluid and facilitate drainage. Turn off the engine and place the motorcycle on a center stand to ensure a stable position.

Under the engine, locate the oil drain plug and place a collection pan underneath it. Use a wrench to unscrew the drain plug and let the used oil drain completely into the pan. After the oil has been drained, screw the drain plug back in and tighten it securely.

Find the oil fill plug on the side of the engine and remove it. Using a funnel, slowly pour the recommended amount of new engine oil as stated in the vehicle manual.

Make sure not to exceed the maximum level. After filling, replace the fill plug and tighten it securely.

Start the engine and let it run for a few minutes, then turn it off and check for any oil leaks. This ensures that the new oil is properly distributed and everything is in place.


Posted on 6 May 2025 by ScegliAuto


Related tutorials

Sniper 150 To replace the battery on a Yamaha Sniper 150, loosen the screws that secure the seat to its housing so that it can be completely removed, giving acc…

How to Remove the Radiator from an Aprilia RSV 1000R

This guide provides the main instructions for removing and replacing the cooling radiator of the Aprilia RSV 1000R motorcycle. First, place your motorcycle on a stand and start unscrewing the fixing screws of the side plastic fairings to remove them; then disconnect the radiator hoses, draining the fluid into a container, and unscrew the bracket screws to remove it from the frame and engine, as illustrated in the video. At this point, install the new radiator and finally top up with the new antifreeze!

Watch the video!


by ScegliAuto

More videos