Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the engine light on the Yamaha MT-09

Model: Yamaha Mt 09
Part: Warning light – error code

Video tutorial

In this guide, we will see the steps that will allow us to reset the engine malfunction indicator light of the Yamaha MT-09, after solving any problems. First, we put the motorcycle on the stand and turn on the instrument panel; we connect our diagnostic software to the engine control unit socket, in order to put the devices in connection, as shown in the video.

At this point, we go to the error menu to confirm and perform the engine light reset; finally, we turn off the panel and disconnect the diagnostic software, finally turning on the engine!


Posted on 6 July 2025 by ScegliAuto


Related tutorials

How to Reset the Engine Warning Light on a Yamaha MT-09
How to Reset the Engine Warning Light on a Yamaha MT-09
Mt 09 This guide provides the necessary instructions to reset the engine warning light on a Yamaha MT-09. First, place the motorcycle on a stand and remove…
How to Remove the Engine Warning Light on the Yamaha MT-09?
How to Remove the Engine Warning Light on the Yamaha MT-09?
Mt 09 In this tutorial, see how to remove the engine warning light on the Yamaha MT-09. This is a simple and quick operation to perform only after resolvin…
How do you set the clock on the Yamaha MT-09?
How do you set the clock on the Yamaha MT-09?
Mt 09 The clock on the Yamaha MT-09 can be adjusted by turning on the instrument panel, inserting the key into the ignition switch: once the instrument pan…

How to Clean the Throttle Body on a Piaggio Beverly

In today's video, see how to clean the throttle body on a Piaggio Beverly. This operation applies to all models of the Beverly from 125 to 500 over various years. First, remember to work only with a cold engine to avoid unpleasant burns. Next, remove the seat by unscrewing the appropriate fastening clips. Once done, proceed to remove the scooter's body; find and remove the appropriate fastening clips. At this point, you can carry out the work in question and then reassemble everything as it was.

Watch the video!


by ScegliAuto

More videos