Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial, see how to remove the engine warning light on the Yamaha MT-09. This is a simple and quick operation to perform only after resolving the issue that caused the light to illuminate. You will also need the device shown in the video, which can be easily found online. Start by connecting this device to the OBD port of the motorcycle, accessible from the battery compartment, then interface it with the corresponding application installed on your smartphone. Next, turn on the instrument cluster, navigate to the general menu, enter "Fault codes", and select the option "Clear logged fault(s)".

Updated on 12 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the engine light on the Yamaha MT-09
How to reset the engine light on the Yamaha MT-09
Mt 09 In this guide, we will see the steps that will allow us to reset the engine malfunction indicator light of the Yamaha MT-09, after solving any proble…
How to Replace the Air Filter on the Yamaha MT 09
How to Replace the Air Filter on the Yamaha MT 09
Mt 09 This guide briefly outlines the steps to remove and replace the air filter of the Yamaha MT 09 motorcycle engine. First, place the bike on a stand an…
How do you replace the motor oil of the Yamaha MT-09?
How do you replace the motor oil of the Yamaha MT-09?
Mt 09 To perform an oil change on the Yamaha MT-09, you need to loosen the drain plug located in the lower center of the bike, allowing all the used oil to…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos