Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In order to replace the sprocket of the Yamaha Ténéré 700, you need to loosen the screws that secure the small panel on the left side of the motorcycle: once the screws holding the panel are loosened, you can remove it and locate the sprocket underneath. This can be removed by loosening the central nut that secures it and removing the chain around it; the new replacement part can then be inserted, allowing you to reposition the chain around it and ensure that everything is working properly.

Posted on 28 August 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Set the Clock on a Yamaha Ténéré 700?
How to Set the Clock on a Yamaha Ténéré 700?
Tenere 700 You can adjust the clock on the Yamaha Ténéré 700 by turning on the ignition and inserting the key into the corresponding ignition switch. Once it is…
How do you replace the exhaust pipe of the Yamaha Ténéré 700?
How do you replace the exhaust pipe of the Yamaha Ténéré 700?
Tenere 700 It will be possible to replace the exhaust of the Yamaha Ténéré 700 by loosening the screws that fix the exhaust terminal to the appropriate supports…
How to Replace the Mirrors on a Yamaha Ténéré 700?
How to Replace the Mirrors on a Yamaha Ténéré 700?
Tenere 700 To replace the mirrors on a Yamaha Ténéré 700, you will need to loosen the nuts that secure the mirrors to their housings on the sides of the handleb…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos