Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Today we will explain how to replace the headlight bulb of the Yamaha Majesty 125 scooter. The steps to be carried out are simple and quick to perform independently and include the use of a star screwdriver. To replace the bulb, we must unscrew the screws located on the sides of the scooter's bumper. After removing the bumper or fork, we can disconnect the connector from the bulb using a flat-head screwdriver in order to remove the connector and thus be able to replace the bulb. Once the work is completed, we reassemble the fork and test the headlight functionality by turning on the scooter.

Posted on 15 September 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlight Bulb on the Yamaha Majesty 125?
Majesty 125 To replace the headlight bulb on the Yamaha Majesty 125, loosen the bolts located at the front of the motorcycle, just below the windscreen. By loose…
How do you reset the Service light of the Yamaha Majesty 125?
How do you reset the Service light of the Yamaha Majesty 125?
Majesty 125 In order to reset the Service light of the Yamaha Majesty 125, you need to turn on the instrument panel of the motorcycle by inserting the ignition k…
How to reset the oil service on the Yamaha Majesty 125 scooter?
How to reset the oil service on the Yamaha Majesty 125 scooter?
Majesty 125 In this tutorial we can see how to reset the oil service on the Yamaha Majesty 125 scooter, an extremely simple and quick operation, to be carried ou…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos