Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the motor oil of a Yamaha FZ?

Model: Yamaha Fz S
Part: Engine oil

Video tutorial

To change the motor oil of a Yamaha FZ, it is important to make sure that the engine is slightly warm, allowing the oil to flow easily. After turning off the bike and stabilizing it, locate the oil drain plug underneath the engine.

Carefully unscrew the plug using a wrench and let all the old oil drain into a suitable container. Allow the oil to drain completely, this may take a few minutes.

Once the draining process is complete, securely screw back the engine plug to prevent any leaks. Next, locate the oil fill plug, which is usually on the side of the engine, and remove it. Using a funnel, slowly pour in the recommended new oil for the Yamaha FZ model, being careful not to exceed the level indicated in the owner's manual.

Check the level using the dipstick, ensuring it is correct. Once finished, close the plug, start the bike, and let the new oil circulate in the engine for a couple of minutes.


Posted on 2 October 2025 by ScegliAuto


Related tutorials

How to replace the engine oil in the Yamaha FZ-S?
How to replace the engine oil in the Yamaha FZ-S?
Fz S In this tutorial we can see how to replace the engine oil in the Yamaha FZ-S, an extremely simple and quick operation. First of all, make sure that t…
How to Replace the Front Headlamp Bulb on a Yamaha FZ-S?
How to Replace the Front Headlamp Bulb on a Yamaha FZ-S?
Fz S In this tutorial, see how to replace the front headlamp bulb on a Yamaha FZ-S, a very simple and quick operation. First, ensure the key is not insert…

How to Remove the Radiator from an Aprilia RSV 1000R

This guide provides the main instructions for removing and replacing the cooling radiator of the Aprilia RSV 1000R motorcycle. First, place your motorcycle on a stand and start unscrewing the fixing screws of the side plastic fairings to remove them; then disconnect the radiator hoses, draining the fluid into a container, and unscrew the bracket screws to remove it from the frame and engine, as illustrated in the video. At this point, install the new radiator and finally top up with the new antifreeze!

Watch the video!


by ScegliAuto

More videos