Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the engine oil in the Yamaha XSR 900?

Model: Yamaha Xsr 900
Part: Engine oil

Video tutorial

In this tutorial we can see how to replace the engine oil in the Yamaha XSR 900, an extremely simple and fast operation. First of all, make sure that the engine is cold enough, then place a container underneath it, locate the drain hole bolt and unscrew it using a 17mm socket wrench.

Let all the oil in the system drain out, then unscrew the old filter using pliers if necessary and tighten both the replacement and the bolt. At this point, all that's left is to pour the necessary amount of oil through the designated upper hole.


Posted on 9 November 2025 by ScegliAuto


Related tutorials

How to replace the engine oil in the Yamaha XSR 900?
How to replace the engine oil in the Yamaha XSR 900?
Xsr 900 .. In this tutorial we can see how to replace the engine oil in the Yamaha XSR 900, a very simple and quick operation. First of all,.. …
How do you replace the motor oil of the Yamaha XSR 900?
How do you replace the motor oil of the Yamaha XSR 900?
Xsr 900 To replace the motor oil of the Yamaha XSR 900, you need to disconnect the drain plug located in the central lower part of the oil pan: this will all…
How do you replace the exhaust pipe of the Yamaha XSR 900?
How do you replace the exhaust pipe of the Yamaha XSR 900?
Xsr 900 To replace the exhaust of the Yamaha XSR 900, you need to loosen the screws that secure the exhaust terminal to its housing: this will be located on …

How to Reset the Service Light on a Vespa Sprint 150?

To reset the Service light on a Vespa Sprint 150, insert the ignition key into the corresponding lock. Once turned to activate the instrument panel, press and hold the button located on the right side of the handlebars. Wait a few seconds with the button pressed until the Service light disappears from the instrument panel. Once the light has been reset, release the button and turn off the ignition by turning the key.

Watch the video!


by ScegliAuto

More videos