Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the engine oil in the Yamaha FZ6?

Model: Yamaha Fz6
Part: Engine oil

Video tutorial

In this tutorial, we can see how to replace the engine oil in the Yamaha FZ6, an extremely simple and quick operation. First of all, we wait for the engine to cool down enough to operate safely, then we position a container underneath the bike, locate the drain hole bolt, and unscrew it using a 17mm socket wrench.

We then let all the oil contained in the system drain out, unscrew the old filter, and tighten both the replacement and the bolt. At this point, all that remains is to add the necessary amount of oil through the designated upper hole.


Posted on 26 January 2026 by ScegliAuto


Related tutorials

Engine Oil and Oil Filter Replacement on Yamaha FZ6 - FZ6 Fazer
Engine Oil and Oil Filter Replacement on Yamaha FZ6 - FZ6 Fazer
Fz6 In today’s tutorial, see how to replace the engine oil and oil filter while performing routine maintenance on a Yamaha FZ6 and FZ6 Fazer. First, posi…
How to Change the Engine Oil and Oil Filter on the Yamaha FZ6
How to Change the Engine Oil and Oil Filter on the Yamaha FZ6
Fz6 In today's video, you will learn how to perform the routine maintenance oil change on the Yamaha FZ6 motorcycle, in Fazer version, in simple steps. F…
How to Change the Engine Oil in the Yamaha FZ6?
How to Change the Engine Oil in the Yamaha FZ6?
Fz6 In this tutorial, you can see how to change the engine oil in the Yamaha FZ6, a very simple and quick operation to perform every 12 months. First, en…

Replacing the Rear Brake Pads of the BMW G310 GS

Follow these brief instructions to remove and replace the rear brake pads (this also applies to the front ones) of the BMW G310 GS motorcycle. First, place the bike on a stand and start by removing the pin and the clip from the rear brake caliper; then remove the old brake pads as shown in the video. Next, clean the caliper of any residual dirt, install the new original brake pads, and secure the pin and clip to lock everything in place, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos