Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Set the Clock on a Yamaha Xmax 250

Model: Yamaha Xmax 250
Part: Clock

Video tutorial

In this guide, you will find instructions to change the time on the Yamaha Xmax 250 scooter. First, place the scooter on the centre stand and start by turning on the instrument panel by turning the key to position one; then press and hold the right button located under the emergency stop button until the time display starts to flash, as shown in the video.

At this point, adjust the hour first, then the minutes, and finally exit the settings menu to save the changes made!


Posted on 5 February 2026 by ScegliAuto


Related tutorials

How to adjust the time on the Yamaha XMAX 250 scooter?
How to adjust the time on the Yamaha XMAX 250 scooter?
Xmax 250 In this tutorial, you will learn how to adjust the time on the Yamaha XMAX 250 scooter. This operation is extremely simple and quick, to be performed…
How to set the clock on a Yamaha Xmax 250?
How to set the clock on a Yamaha Xmax 250?
Xmax 250 To set the clock on a Yamaha Xmax 250, insert the ignition key into the ignition switch and turn it to power on the instrument cluster. Once it is on…
How to adjust the time on the Yamaha XMAX 250 scooter?
How to adjust the time on the Yamaha XMAX 250 scooter?
Xmax 250 In this tutorial, we can see how to adjust the time on the Yamaha XMAX 250 scooter, an extremely simple and quick operation to be carried out, for ex…

How to Clean the Throttle Body on a Piaggio Beverly

In today's video, see how to clean the throttle body on a Piaggio Beverly. This operation applies to all models of the Beverly from 125 to 500 over various years. First, remember to work only with a cold engine to avoid unpleasant burns. Next, remove the seat by unscrewing the appropriate fastening clips. Once done, proceed to remove the scooter's body; find and remove the appropriate fastening clips. At this point, you can carry out the work in question and then reassemble everything as it was.

Watch the video!


by ScegliAuto

More videos