Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to set the clock on a Yamaha Xmax 250?

Model: Yamaha Xmax 250
Part: Clock

Video tutorial

To set the clock on a Yamaha Xmax 250, insert the ignition key into the ignition switch and turn it to power on the instrument cluster. Once it is on, press and hold the button located on the right side of the handlebars, at the base of the corresponding dial.

You will notice that the hours will start to flash and can be adjusted by repeatedly pressing the same button; to confirm the hour change, keep the button pressed. The minutes will then start to flash, which can also be adjusted in the same manner.


Updated on 5 September 2026 by ScegliAuto


Related tutorials

How to set the clock of the Yamaha Xmax 250
How to set the clock of the Yamaha Xmax 250
Xmax 250 Today's steps will show us how to set the clock on the display of the instrument panel of the Yamaha Xmax 250 scooter. First, we put the scooter on t…
How to Set the Clock on the Yamaha Xmax 250?
How to Set the Clock on the Yamaha Xmax 250?
Xmax 250 To adjust the clock on the Yamaha Xmax 250, insert the ignition key into the ignition switch and turn it to power on the instrument panel. Once the p…
How to adjust the time on the Yamaha XMAX 250 scooter?
How to adjust the time on the Yamaha XMAX 250 scooter?
Xmax 250 In this tutorial, you will learn how to adjust the time on the Yamaha XMAX 250 scooter. This operation is extremely simple and quick, to be performed…

Replacing the Rear Brake Pads of the BMW G310 GS

Follow these brief instructions to remove and replace the rear brake pads (this also applies to the front ones) of the BMW G310 GS motorcycle. First, place the bike on a stand and start by removing the pin and the clip from the rear brake caliper; then remove the old brake pads as shown in the video. Next, clean the caliper of any residual dirt, install the new original brake pads, and secure the pin and clip to lock everything in place, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos