Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to set the clock of the Yamaha Xmax 250

Model: Yamaha Xmax 250
Part: Clock

Video tutorial

Today's steps will show us how to set the clock on the display of the instrument panel of the Yamaha Xmax 250 scooter. First, we put the scooter on the center stand and start the instrument panel; then we press the trip button to the left, entering the clock setting mode, as shown in the video.

At this point, we set the hour first and then the minutes, finally exiting the settings to save the changes made; we turn off the instrument panel and turn it back on, verifying the correct time change!


Posted on 27 May 2025 by ScegliAuto


Related tutorials

How to Reset the Service Light on the Yamaha XMax 250
How to Reset the Service Light on the Yamaha XMax 250
Xmax 250 You can manually reset the service light on the dashboard of your Yamaha XMax 250 without any difficulty, even if you are on your own. Follow the ste…
How to set the clock on a Yamaha Xmax 250?
How to set the clock on a Yamaha Xmax 250?
Xmax 250 To set the clock on a Yamaha Xmax 250, insert the ignition key into the ignition switch and turn it to power on the instrument cluster. Once it is on…
How to Set the Clock on a Yamaha Xmax 250
How to Set the Clock on a Yamaha Xmax 250
Xmax 250 In this guide, you will find instructions to change the time on the Yamaha Xmax 250 scooter. First, place the scooter on the centre stand and start b…

How to Clean the Throttle Body on a Piaggio Beverly

In today's video, see how to clean the throttle body on a Piaggio Beverly. This operation applies to all models of the Beverly from 125 to 500 over various years. First, remember to work only with a cold engine to avoid unpleasant burns. Next, remove the seat by unscrewing the appropriate fastening clips. Once done, proceed to remove the scooter's body; find and remove the appropriate fastening clips. At this point, you can carry out the work in question and then reassemble everything as it was.

Watch the video!


by ScegliAuto

More videos