Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Yamaha Tenere 700
Part: Clock

In this tutorial, you will see how to set the time on the Yamaha Tenere 700, a very simple and quick operation to be performed, for example, after disconnecting the battery or following the switch to daylight saving time. First, insert the key, then turn on the instrument panel and press both buttons on the dashboard until the clock starts to flash. Next, adjust the hour with the lower button, switch to minutes with the upper button, and adjust them in the same way. To save the setting, simply press the upper button once more.

Posted on 13 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to set the clock on the Yamaha Tenere 700
How to set the clock on the Yamaha Tenere 700
Tenere 700 Today we will see the instructions that will show us how to change the time on the display of the instrument panel of the Yamaha Tenere 700, in simpl…
How to Set the Time on the Yamaha Tenere 700
How to Set the Time on the Yamaha Tenere 700
Tenere 700 Today, we will look at the information that will allow you to change the time on the display of the Yamaha Tenere 700 instrument panel. First, place …
How to Replace the Air Filter on the Yamaha Tenere 700?
How to Replace the Air Filter on the Yamaha Tenere 700?
Tenere 700 In this tutorial, you will see how to remove and replace the air filter on the Yamaha Tenere 700, a very simple and quick operation. First, remove th…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos