Do it yourself
Frequently asked questions about cars and motorcycles

Model: Yamaha Tenere 700
Part: Clock

Today, we will look at the information that will allow you to change the time on the display of the Yamaha Tenere 700 instrument panel. First, place the bike on its stand and start the instrument panel. Then press and hold the two buttons on the instrument panel until the clock display starts to flash, as shown in the video. At this point, use the lower button to change the hour, then press the upper button to move to the minutes. Once you have adjusted the time, press the upper button again to exit the setting!

Posted on 18 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Tenere 700 Today we will see the instructions that will show us how to change the time on the display of the instrument panel of the Yamaha Tenere 700, in simpl…
Tenere 700 .. In this tutorial, you will see how to set the time on the Yamaha Tenere 700, a very simple and quick operation to be performed, for.. …
Tenere 700 To set the clock of the Yamaha Ténéré 700, you need to turn on the instrument panel by inserting the key into the ignition switch: once the panel is …

How to Service the Beta RR 350

This video will illustrate the steps to perform the routine maintenance service, replacing the engine oil and oil filter on the Beta RR 350 enduro bike. First, place the bike on a stand and start by loosening the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then clean the small oil filter (replacing it with a new one if too dirty). Finally, top up with new oil, of the correct type for your engine, filling to the maximum level!

Watch the video!


by ScegliAuto

More videos