Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Set the Clock on a Yamaha Ténéré 700?

Model: Yamaha Tenere 700
Part: Clock

Video tutorial

You can adjust the clock on the Yamaha Ténéré 700 by turning on the ignition and inserting the key into the corresponding ignition switch. Once it is on, press and hold both buttons located at the top left of the instrument panel simultaneously.

This will cause the hours to start flashing, which can be adjusted using the lower button; after setting the hours, press the upper button to make the minutes flash and adjust them in the same way.


Posted on 25 February 2026 by ScegliAuto


Related tutorials

How to Set the Clock on the Yamaha Ténéré 700?
How to Set the Clock on the Yamaha Ténéré 700?
Tenere 700 To set the clock on the Yamaha Ténéré 700, turn on the instrument panel by inserting the key into the ignition switch. Once the panel is powered, pre…
How to set the clock on the Yamaha Ténéré 700?
How to set the clock on the Yamaha Ténéré 700?
Tenere 700 To adjust the clock on the Yamaha Ténéré 700, turn on the instrument cluster by inserting the ignition key into the corresponding ignition switch. Th…
How to set the clock on the Yamaha Tenere 700
How to set the clock on the Yamaha Tenere 700
Tenere 700 Today we will see the instructions that will show us how to change the time on the display of the instrument panel of the Yamaha Tenere 700, in simpl…

How to Change the Engine Oil of a BMW R9T

To change the engine oil of a BMW R9T, follow these steps. Ensure the engine is warm but not too hot. Position the bike on a flat surface and lift the front using a motorcycle stand. Remove the oil cap from the engine oil reservoir. Place a catch container under the oil drain plug, usually located on the underside of the engine. Unscrew the oil drain plug and let the old oil drain completely into the container. Once drained, re-tighten the oil drain plug. Remove the oil filter using an oil filter wrench. Clean the mounting surface of the filter and apply a bit of new oil to the seal of the new filter. Install the new oil filter. At this point, fill the engine with new oil, and you will have completed the replacement.

Watch the video!


by ScegliAuto

More videos