Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Yamaha Xmax 300
Part: Battery

Today, we will see the instructions that will allow us to remove and replace the battery of the Yamaha Xmax 300 scooter. First, place the scooter on its stand and begin by removing the plastic cover located at the bottom right, next to the ignition switch; inside, you will find the battery. Disconnect both terminals (positive and negative) as shown in the video. At this point, remove the battery from its compartment and replace it with a new original one; insert it in the correct orientation and connect it electrically, checking that the engine starts!

Posted on 2 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Key Battery on the Yamaha Xmax 300
How to Replace the Key Battery on the Yamaha Xmax 300
Xmax 300 This guide shows you the useful steps to disassemble and replace the battery of the remote control key for the Yamaha Xmax 300 scooter. First, take t…
How to Replace the Battery of the Yamaha Xmax 300?
How to Replace the Battery of the Yamaha Xmax 300?
Xmax 300 You can replace the battery of the Yamaha Xmax 300 by loosening the screws that secure the front panel of the bike to its housing, located at the cen…
Replacing the Battery on Yamaha Xmax 300
Replacing the Battery on Yamaha Xmax 300
Xmax 300 Today you will see how to remove and replace the battery on a Yamaha Xmax 300. First, remove the fixing screws of the visor, thus removing it; then r…

How to Replace the Engine Oil and Oil Filter on an Aprilia RSV 1000

This short video will show you how to carry out the routine maintenance service by replacing the engine oil and oil filter on the Aprilia RSV 1000 motorcycle. First, place your motorcycle on the centre stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then use the appropriate tool to unscrew and remove the oil filter, replacing the cartridge with a new one as shown in the video. Finally, unscrew the filler screw and top up by pouring in the suitable oil for your engine!

Watch the video!


by ScegliAuto

More videos