Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Yamaha
    3. : Mio Sporty
Start the engine of your scooter to warm it up. This will reduce the viscosity of the oil, allowing it to flow better when you drain it. Using a flat screwdriver, undo the upper hole of the engine compartment. Then, using a spanner, undo the bolt that seals the drain hole. Why undo the fill hole first? This prevents a vacuum and helps the lubricant flow out due to air circulation. Collect the used oil in a container (and dispose of it properly), close the lower hole, and refill the same amount through the fill hole.

Updated on 31 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Wheel Bearing of the Yamaha Mio Sporty Scooter?
How to Replace the Front Wheel Bearing of the Yamaha Mio Sporty Scooter?
Mio Sporty In this tutorial, we will see how to replace the front wheel bearing of the Yamaha Mio Sporty scooter. First, lift the front of the scooter, then rem…

How to Service the Piaggio Vespa GTS 300

This brief guide will illustrate the main steps to perform the routine maintenance service on the Piaggio Vespa GTS 300, replacing the engine oil and oil filter. First, place the scooter on the centre stand and start by unscrewing the oil drain bolt found under the engine, allowing it to drain into a container for about ten minutes; then unscrew the oil filter cartridge using the appropriate tool, and hand-tighten the new one. Finally, unscrew the filler cap and top up, filling to the maximum level mark!

Watch the video!


by ScegliAuto

More videos