Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Yamaha
    3. : Mio Sporty

Model: Yamaha Mio Sporty
Part: Bearing

In this tutorial, we will see how to replace the front wheel bearing of the Yamaha Mio Sporty scooter. First, lift the front of the scooter, then remove the wheel by unscrewing the two bolts from the hub. Next, extract the spacer and any seal, if present. To remove the bearing, you can use a puller, or, if you don't have one, you can lightly tap with a long bolt and a hammer. Once extracted, insert the replacement bearing, apply some lubricant, and reassemble everything by following the reverse procedure.

Updated on 1 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Oil Change on Yamaha Mio Sporty
Oil Change on Yamaha Mio Sporty
Mio Sporty Start the engine of your scooter to warm it up. This will reduce the viscosity of the oil, allowing it to flow better when you drain it. Using a flat…

How to Replace the Clutch on a Triumph Speed Triple?

To replace the clutch on a Triumph Speed Triple, loosen the bolts securing the covers of the three casings located on the right side of the bike, namely the starter motor, the engine, and then the clutch. Once these covers are removed, you can access the bolts securing the clutch, unscrew them, and slide the clutch plates out of their housing. This will allow you to insert the new plates into their place, securing everything with the appropriate bolts; finally, reinstall all the casings.

Watch the video!


by ScegliAuto

More videos