Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
As shown in the video, unscrew the lower bolt of the hub oil compartment. Be careful with the copper washer, do not lose it, and remember which way it was inserted. Collect the used oil in a container while spinning the wheel to allow it to drain more quickly. It is advisable to also unscrew the upper bolt of the compartment to avoid a vacuum and facilitate the flow. Once all the oil has drained, insert the washer IN THE OPPOSITE DIRECTION to how it was previously, to ensure equal wear on both sides. Screw the drain plug back in, pour oil into the upper hole, and close it as well.

Updated on 2 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the engine oil indicator (service) on the Yamaha Xmax 250
How to reset the engine oil indicator (service) on the Yamaha Xmax 250
Xmax 250 Today we will see the instructions that will allow us to reset the service maintenance light for the regular oil change of the Yamaha Xmax 250 scoote…
Engine Oil and Oil Filter Replacement for Yamaha Xmax 250
Engine Oil and Oil Filter Replacement for Yamaha Xmax 250
Xmax 250 Discover the procedure necessary to replace the engine oil and oil filter while performing the routine maintenance service on the Yamaha Xmax 250 sco…
Oil change reset on a Yamaha Xmax 250
Xmax 250 Through this very short video tutorial today, we can see how to reset the service light on a Yamaha Xmax 250. This operation is very simple to do and…

How to Replace and Install the Front Wheel on a Beta RR 300

Today, we will go through the instructions to install or replace the front wheel on the Beta RR 300 enduro bike by following these simple steps. First, place your bike on a stand and lift the front wheel off the ground. Next, unscrew the fixing bolts of the front brake caliper to remove it. At this point, unscrew the central axle of the wheel, removing and possibly replacing the tyre. Then, tighten the fork nuts and reassemble everything by reversing the disassembly procedure!

Watch the video!


by ScegliAuto

More videos