Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Oil change reset on a Yamaha Xmax 250

Model: Yamaha Xmax 250
Part: Checks and maintenance

This video is currently unavailable

Through this very short video tutorial today, we can see how to reset the service light on a Yamaha Xmax 250. This operation is very simple to do and we can do it independently after changing the vehicle's motor oil, but let's see how to proceed immediately.

Start by turning on the vehicle's ignition without starting the engine, then press the "TRIP" button until the "trip OIL" screen is displayed on the display.

Next, press and hold the trip button to make the oil change mileage interval flash, and finally release the button and press it again until the maintenance interval is reset to zero.


Posted on 31 December 2024 by ScegliAuto


Related tutorials

How to Change the Engine Oil in a Yamaha XMAX 250 Scooter
How to Change the Engine Oil in a Yamaha XMAX 250 Scooter
Xmax 250 In this tutorial, you will see how to change the engine oil in a Yamaha XMAX 250 scooter, a very simple and quick operation to perform every 12 month…
How to reset the engine oil indicator (service) on the Yamaha Xmax 250
How to reset the engine oil indicator (service) on the Yamaha Xmax 250
Xmax 250 Today we will see the instructions that will allow us to reset the service maintenance light for the regular oil change of the Yamaha Xmax 250 scoote…
Resetting the Engine Oil Change Light on a Yamaha Xmax 250
Resetting the Engine Oil Change Light on a Yamaha Xmax 250
Xmax 250 Today's procedure will show you how to reset the maintenance light for the engine oil change on the Yamaha Xmax 250 scooter. First, turn on the ignit…

How to replace the transmission oil in the KTM Exc 300

Today, let's discover how to carry out the routine maintenance service by replacing the transmission oil in the two-stroke enduro bike KTM Exc 300. First, place your bike on a stand and start by unscrewing the oil drain bolt located under the engine, allowing the gearbox oil to drain into a container for about ten minutes; then clean the small mesh oil filter, as shown in the video. At this point, unscrew the filler cap and top up with the new gearbox oil, the specifications of which are indicated in the owner's manual!

Watch the video!


by ScegliAuto

More videos