Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Engine Oil Change Light on a Yamaha Xmax 250

Model: Yamaha Xmax 250
Part: Service warning light

Video tutorial

Today's procedure will show you how to reset the maintenance light for the engine oil change on the Yamaha Xmax 250 scooter. First, turn on the ignition by turning the key to position one, and press and hold the reset button located on the right side of the instrument panel; wait for the service message to flash on the display, as shown in the video.

After about ten seconds, the service light will be reset; then turn off the ignition and start the engine to complete the reset operation!


Updated on 23 August 2026 by ScegliAuto


Related tutorials

How to reset the engine oil indicator (service) on the Yamaha Xmax 250
How to reset the engine oil indicator (service) on the Yamaha Xmax 250
Xmax 250 Today we will see the instructions that will allow us to reset the service maintenance light for the regular oil change of the Yamaha Xmax 250 scoote…
How to Change the Engine Oil in a Yamaha XMAX 250 Scooter
How to Change the Engine Oil in a Yamaha XMAX 250 Scooter
Xmax 250 In this tutorial, you will see how to change the engine oil in a Yamaha XMAX 250 scooter, a very simple and quick operation to perform every 12 month…
Resetting the Service Light on a Yamaha Xmax 250
Resetting the Service Light on a Yamaha Xmax 250
Xmax 250 The following instructions will allow you to reset the maintenance warning (service) on the Yamaha Xmax 250 scooter. First, place the scooter on its …

How to Set the Time on a Suzuki Burgman 650 Scooter?

In this tutorial, you will learn how to set the time on a Suzuki Burgman 650 scooter, a very simple and quick operation to perform after disconnecting the battery or when switching to daylight saving time. First, insert the key, then turn on the instrument panel and press the two buttons located below the display until the clock starts to flash. At this point, adjust the hour using the "Select" button, set the minutes with the "Adjust" button, and save the setting by pressing both buttons again.

Watch the video!


by ScegliAuto

More videos