Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Discover the procedure necessary to replace the engine oil and oil filter while performing the routine maintenance service on the Yamaha Xmax 250 scooter. First, place the scooter on its centre stand and begin by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then, unscrew the three screws of the oil filter cover, removing and replacing the cartridge with a new one. At this point, unscrew the filler cap and top up by pouring in the correct amount of engine oil!

Updated on 25 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil in a Yamaha XMAX 250 Scooter
How to Change the Engine Oil in a Yamaha XMAX 250 Scooter
Xmax 250 In this tutorial, you will see how to change the engine oil in a Yamaha XMAX 250 scooter, a very simple and quick operation to perform every 12 month…
How to Change the Engine Oil on a Yamaha Xmax 250
How to Change the Engine Oil on a Yamaha Xmax 250
Xmax 250 Before starting, position your Yamaha Xmax 250 on its central stand, and then run the engine for a few minutes to help the engine oil drain out. Begi…
How do you replace the motor oil of the Yamaha Xmax 250?
How do you replace the motor oil of the Yamaha Xmax 250?
Xmax 250 In order to replace the motor oil of the Yamaha Xmax 250, you will need to loosen the drain plug of the oil pan located at the central bottom part of…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos