Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil on a Yamaha Xmax 250

Model: Yamaha Xmax 250
Part: Engine oil

Video tutorial

Before starting, position your Yamaha Xmax 250 on its central stand, and then run the engine for a few minutes to help the engine oil drain out. Begin by unscrewing and removing the lower oil drain bolt. This will allow the engine oil to flow out. Once done, proceed to re-screw the drain bolt.

At this point, unscrew and remove the upper refill cap, and then insert the new engine oil. After completing this step, re-screw the refill cap, and you will have finished the replacement.


Updated on 15 April 2026 by ScegliAuto


Related tutorials

How do you replace the motor oil of the Yamaha Xmax 250?
How do you replace the motor oil of the Yamaha Xmax 250?
Xmax 250 In order to replace the motor oil of the Yamaha Xmax 250, you will need to loosen the drain plug of the oil pan located at the central bottom part of…
How to Change the Engine Oil in a Yamaha XMAX 250 Scooter
How to Change the Engine Oil in a Yamaha XMAX 250 Scooter
Xmax 250 In this tutorial, you will see how to change the engine oil in a Yamaha XMAX 250 scooter, a very simple and quick operation to perform every 12 month…
How to Replace the Engine Oil on a Yamaha Xmax
How to Replace the Engine Oil on a Yamaha Xmax
Xmax 250 In this short video, learn how to change the engine oil on your Yamaha Xmax 250. If possible, place the scooter on a hydraulic workbench for easier a…

How to Replace the Headlight Bulb on a Honda CBR 300?

To replace the headlight bulb on a Honda CBR 300, start by turning the handlebars in the opposite direction to the side where you need to replace the bulb to facilitate access. Next, remove the internal rear cover of the headlight, which is usually secured with screws or clips. Once the cover is removed, you will have access to the bulb. Gently disconnect the electrical connector from the bulb, then turn the bulb counterclockwise to unlock it from the holder. Carefully pull the bulb out of the holder and replace it with a new bulb of the same type and model. Ensure the new bulb is correctly installed in the holder and reconnect the electrical connector. Finally, replace the internal rear cover of the headlight and secure it firmly with the screws or clips. Return the handlebars to their original position, and the job is complete.

Watch the video!


by ScegliAuto

More videos