Do it yourself
Frequently asked questions about cars and motorcycles
In order to replace the motor oil of the Yamaha Xmax 250, you will need to loosen the drain plug of the oil pan located at the central bottom part of the vehicle: once the plug has been removed, you will be able to drain all the used oil into a properly positioned container. At this point, you can also remove the corresponding oil filter located at the bottom of the motorcycle: then you can finish by topping up. You will need to add the necessary amount of oil through the vent on the right side of the motorcycle.

Posted on 10 April 2025 by ScegliAuto

Video tutorial

Related tutorials

Xmax 250 Before starting, position your Yamaha Xmax 250 on its central stand, and then run the engine for a few minutes to help the engine oil drain out. Begi…
Xmax 250 In this tutorial, you will see how to change the engine oil in a Yamaha XMAX 250 scooter, a very simple and quick operation to perform every 12 month…
Xmax 250 To reset the Service light on the Yamaha Xmax 250, insert the ignition key into the ignition switch to power up the instrument cluster. Once powered …

How to Replace the Engine Oil and Oil Filter on an Aprilia RSV 1000

This short video will show you how to carry out the routine maintenance service by replacing the engine oil and oil filter on the Aprilia RSV 1000 motorcycle. First, place your motorcycle on the centre stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then use the appropriate tool to unscrew and remove the oil filter, replacing the cartridge with a new one as shown in the video. Finally, unscrew the filler screw and top up by pouring in the suitable oil for your engine!

Watch the video!


by ScegliAuto

More videos