Do it yourself
Frequently asked questions about cars and motorcycles

Oil Change on Yamaha YZ250F

Model: Yamaha Yz 250f
Part: Engine oil

Video tutorial

Warm up the bike for a few minutes to make the engine oil more fluid: this way, you can be more certain that it has completely drained by the end of the service. As shown in the video, unscrew the bolt that closes the lower drain hole located inside the lower fairing.

Collect the used oil in a container and dispose of it properly. Also, open the upper fill hole immediately to avoid a vacuum.

Measure the amount of oil that has drained, close the drain hole, and refill the same amount from the upper hole. Check the condition of the oil filter.


Updated on 9 April 2026 by ScegliAuto


Related tutorials

Yz 250f In this tutorial, we will see how to replace the engine oil in the Yamaha YZ250F, a process that is extremely simple and quick. First of all, let's m…
Yz 250f In this tutorial, you will see how to replace the engine oil in a Yamaha YZ250F, a very simple and quick operation. First, ensure the engine is suffi…
Yz 250f In this tutorial, see how to change the engine oil in the Yamaha YZ250F, a very simple and quick operation. First, ensure that the engine is sufficie…

How to Remove the Radiator from an Aprilia RSV 1000R

This guide provides the main instructions for removing and replacing the cooling radiator of the Aprilia RSV 1000R motorcycle. First, place your motorcycle on a stand and start unscrewing the fixing screws of the side plastic fairings to remove them; then disconnect the radiator hoses, draining the fluid into a container, and unscrew the bracket screws to remove it from the frame and engine, as illustrated in the video. At this point, install the new radiator and finally top up with the new antifreeze!

Watch the video!


by ScegliAuto

More videos