Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Brake Pads on a Yamaha Super Tenere

Model: Yamaha Super Tenere
Part: Brake pads

Video tutorial

First, remove the pins holding the pads in place simply by pulling them out (you may use a flat screwdriver to assist). At this point, you can remove the pin by pulling it with pliers.

Now that the pin is out, the outer support will also come off, as there is nothing left to hold it in place. Once here, you can also remove the brake pads from their housing.

Slightly widen the pistons before inserting the new pads into the caliper, as these will obviously be thicker than the ones removed. Refit the support, the pin, and the pins.


Updated on 18 April 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlamp Bulb on a Yamaha Super Ténéré?
How to Replace the Front Headlamp Bulb on a Yamaha Super Ténéré?
Super Tenere To replace the front headlamp bulb on a Yamaha Super Ténéré, access the front part of the motorcycle located between the handlebars and the front fai…
How to Replace the Headlight Bulb on a Yamaha Super Ténéré?
How to Replace the Headlight Bulb on a Yamaha Super Ténéré?
Super Tenere To replace the headlight bulb on the Yamaha Super Ténéré, first remove the circular protective cover from the inside of the headlamp. This cover is a…
How to Replace the Air Filter on the Yamaha Super Ténéré?
How to Replace the Air Filter on the Yamaha Super Ténéré?
Super Tenere To replace the air filter on the Yamaha Super Ténéré, loosen the screws securing the fuel tank laterally, along with those at the front and rear: you…

How to Remove the Radiator from an Aprilia RSV 1000R

This guide provides the main instructions for removing and replacing the cooling radiator of the Aprilia RSV 1000R motorcycle. First, place your motorcycle on a stand and start unscrewing the fixing screws of the side plastic fairings to remove them; then disconnect the radiator hoses, draining the fluid into a container, and unscrew the bracket screws to remove it from the frame and engine, as illustrated in the video. At this point, install the new radiator and finally top up with the new antifreeze!

Watch the video!


by ScegliAuto

More videos