Do it yourself
| ||||
|
Model: Yamaha Yzf R125
In order to replace the clutch plates of the Yamaha YZF R125 you have to remove all the screws that fix the side fairing of the bike, from the right side. The bike must then be placed on its left side, removing the oil filter cap, the oil filter housing and the filter itself. At this point it will be possible to loosen all the screws that fix the clutch housing: unscrew the central pin and remove the nuts on the clutch springs. Now the old discs can be replaced with new spare parts, and all the previously removed parts can be mounted.
Posted on 19 February 2024 by ScegliAuto
|
How to replace the rear brake pads of Benelli TRK 502?In order to replace the rear brake pads of the Benelli TRK 502 it is necessary to loosen the bolts that fix the caliper, so that it can be detached from the relative disc of the rear wheel. Once the caliper has been removed, it will be possible to go and extract the old pads from the inside of the caliper so that the new spare parts can be inserted. Once the new pads have been inserted inside the caliper, it will be necessary to position the latter on its disc, fixing it with the bolts that were previously removed. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.004
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |