Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Yamaha Yz 250f
Part:

Today, you will discover the necessary instructions for removing and replacing the clutch lever, as well as the front brake lever, on a Yamaha YZ 250F enduro bike. First, loosen the plastic screw of the clutch cable adjuster; then remove the rubber cover of the lever and unscrew the central fixing screw using a socket spanner. At this point, disconnect the clutch cable to remove and replace the lever; correctly insert the new one and reassemble everything, applying the reverse procedure!

Updated on 20 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the clutch of the Yamaha YZ 250F?
How do you replace the clutch of the Yamaha YZ 250F?
Yz 250f To replace the clutch of the Yamaha YZ 250F, you will need to loosen the screws that secure the special cover casing located on the right side of the…
How do you replace the clutch on the Yamaha YZ 250FZ?
How do you replace the clutch on the Yamaha YZ 250FZ?
Yz 250f To replace the clutch on the Yamaha YZ 250FX, you need to loosen the screws that secure the clutch cover, located on the lower central part of the ri…
How to Replace the Engine Oil and Oil Filter on the Yamaha YZ 250F
How to Replace the Engine Oil and Oil Filter on the Yamaha YZ 250F
Yz 250f In this guide, discover the procedure that will allow you to perform the routine maintenance service by replacing the engine oil and oil filter on th…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos