Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Yamaha Xmax 250
Part: Headlight

This is a very simple operation: use a Phillips screwdriver to remove the three screws from the front casing (the last one is located at the bottom). Pull and then remove the panel. Disconnect the connector by pulling it out of its socket, then unscrew the bulb and insert the new one: nothing simpler! Reconnect the bulb-connector duo and reassemble the casing by screwing in the three screws. Check if the bulb lights up by turning the ignition key. If you intend to replace the entire headlamp, you must disconnect the lower terminal, the metal tab, and the rubber cover.

Updated on 23 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Front Headlight Bulb on Yamaha Xmax 250
Replacing Front Headlight Bulb on Yamaha Xmax 250
Xmax 250 In this video tutorial, you will learn how to remove and replace the front headlight bulb of a Yamaha Xmax 250. First, remove the front fairing: use …
How to replace the headlight bulb of the Yamaha Xmax 250
How to replace the headlight bulb of the Yamaha Xmax 250
Xmax 250 Let's briefly see the steps that will allow us to disassemble and replace the low beam and high beam bulb of the front headlight of the Yamaha Xmax 2…
How to reset the service indicator on the Yamaha XMax 250
How to reset the service indicator on the Yamaha XMax 250
Xmax 250 The manual reset of the service light on the central panel of your Yamaha XMax 250 can be completed without any difficulty even if you are on your ow…

How to Replace the Headlight Bulbs on the KTM RC 200?

As shown in this tutorial, replacing the headlight bulbs on the KTM RC 200 is an extremely simple and quick task. First, ensure that the key is not inserted for safety. Then, approach the headlight in question, locate the bulb holder, and turn it slightly counter-clockwise. Once done, disconnect the power connector, attach the new bulb, and reassemble everything. Avoid touching the glass of the replacement bulb directly with your bare hands, as any residues could cause it to overheat.

Watch the video!


by ScegliAuto

More videos