Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the variator of the Keeway K-Blade 125?

Model: Keeway K Blade 125
Part:

Video tutorial

In order to replace the variator of the Keeway K-Blade 125, you need to loosen the screws that secure the transmission cover, located near the rear wheel on the left side of the motorcycle. Once these screws are loosened, you can locate the variator which must be freed from its seat by loosening the central nut. Once this variator is freed, you can remove the transmission belt around it and insert the new variator.

It must be fixed with the central nut and ensure that everything is working properly.


Posted on 4 March 2025 by ScegliAuto


Related tutorials

How to Remove the Belt, Variator, and Clutch of the Keeway K-Blade 125
How to Remove the Belt, Variator, and Clutch of the Keeway K-Blade 125
K Blade 125 .. the belt, variator, and clutch of the Keeway K-Blade 125 scooter. First, place the scooter on the centre stand and begin unscrewing all the screws of.. …
How to replace the air filter on the Keeway K-Blade 125?
How to replace the air filter on the Keeway K-Blade 125?
K Blade 125 .. On the Keeway K-Blade 125, replacing the air filter involves unscrewing the screws that secure the cover containing the.. …
How to Change the Engine Oil on a Keeway K-Blade 125?
How to Change the Engine Oil on a Keeway K-Blade 125?
K Blade 125 .. To change the engine oil on the Keeway K-Blade 125, loosen the drain plug located at the central lower part of the motorcycle. Once loosened,.. …

How to Set the Time on a Kymco Super Dink 350 Scooter?

In this tutorial, you will see how to set the time on the Kymco Super Dink 350 scooter, a very simple and quick operation to perform, for example, after disconnecting the battery or following a time change. First, switch on the instrument cluster, then navigate to the "ODO" odometer using the "MODE" button. Next, press and hold both the "MODE" and "FUNC" buttons until the clock starts to flash, then release them. At this point, you can adjust the hour using the "RESET" button, switch to minutes with the "MODE" button, and save the setting by pressing the initial buttons a second time.

Watch the video!


by ScegliAuto

More videos