Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To change the engine oil on the Keeway K-Blade 125, loosen the drain plug located at the central lower part of the motorcycle. Once loosened, you can collect all the used oil in an appropriately positioned container. You will also find the oil filter, which can be removed from its housing and replaced with a new spare part. After replacing the filter, top up the oil through the designated breather located on the lower central side of the right flank of the motorcycle, adding the necessary amount of oil.

Updated on 22 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil in a Keeway K-Blade 125?
How to Change the Engine Oil in a Keeway K-Blade 125?
K Blade 125 .. To change the engine oil on the Keeway K-Blade 125, unscrew the oil drain plug located at the central lower part of the bike. Once the plug is.. …
How to Change the Engine Oil on a Keeway K-Blade 125
How to Change the Engine Oil on a Keeway K-Blade 125
K Blade 125 .. To change the engine oil on a Keeway K-Blade 125, unscrew the oil drain plug located at the central bottom of the vehicle. Once the plug is.. …
How to Change the Gear Oil on a Keeway K-Blade 125?
How to Change the Gear Oil on a Keeway K-Blade 125?
K Blade 125 .. To change the gear oil on a Keeway K-Blade 125, loosen the bolt that secures the oil drain plug located near the rear wheel of the bike, right.. …

How to Reset the Engine Oil Light on a Yamaha XMax 250

This short video demonstrates the procedure to reset the engine oil light on a Yamaha XMax 250 scooter. The operation is very simple and quick; first, insert the motorcycle key into the designated slot and turn it to the first position to power on the instrument panel without starting the vehicle. At this point, you will see the light on the display; simply press the "oil change" button located at the centre of the motorcycle's speedometer and hold it until the light stops flashing. The operation will then be complete; to verify success, turn off and then turn on the instrument panel.

Watch the video!


by ScegliAuto

More videos