Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To change the engine oil on the Keeway K-Blade 125, unscrew the oil drain plug located at the central bottom of the motorcycle. Once the plug is opened, collect the used oil in a suitably placed container; next to the drain plug, you will find the oil filter which must also be unscrewed and removed from its housing to be replaced with a new spare part. After the replacement, top up by inserting the new oil through the breather on the rear right side of the motorcycle.

Updated on 23 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil on a Keeway K-Blade 125
How to Change the Engine Oil on a Keeway K-Blade 125
K Blade 125 .. To change the engine oil on a Keeway K-Blade 125, unscrew the oil drain plug located at the central bottom of the vehicle. Once the plug is.. …
How to Change the Engine Oil in a Keeway K-Blade 125?
How to Change the Engine Oil in a Keeway K-Blade 125?
K Blade 125 .. To change the engine oil on the Keeway K-Blade 125, unscrew the oil drain plug located at the central lower part of the bike. Once the plug is.. …
How to Change the Engine Oil on a Keeway K-Blade 125?
How to Change the Engine Oil on a Keeway K-Blade 125?
K Blade 125 .. To change the engine oil on the Keeway K-Blade 125, loosen the drain plug located at the central lower part of the motorcycle. Once loosened,.. …

What Does the V-Belt Light Indicate on a Yamaha NMAX Scooter and How to Remove It?

If the V-BELT light has illuminated on the instrument cluster of your Yamaha NMAX scooter, it means it is time to replace the drive belt as it has exceeded the relevant interval. You can entrust this maintenance task to your trusted workshop; the cost will not be particularly excessive. Once this is done, you can manually reset the light by following the procedure shown in this tutorial. First, turn on the instrument cluster, then repeatedly press the left button on the dashboard to reach the service interval in question. At this point, press and hold the right button once to initialise the reset, and a second time to complete it.

Watch the video!


by ScegliAuto

More videos