Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this short and simple guide, you will learn how to remove and replace the front suspension on a Piaggio Vespa PX 150, as well as on an LML Star 150. First, place the central stand and begin to unscrew the nuts securing the front wheel to remove it; then unscrew the suspension bolt, also removing the screw located at the top to detach it from the mudguard, as shown in the video. At this point, remove and replace the suspension with the new one of the correct type; then reassemble the front wheel, applying the reverse procedure!

Updated on 4 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Mudguard on the Piaggio Vespa PX 150 - LML Star 150
How to Replace the Front Mudguard on the Piaggio Vespa PX 150 - LML Star 150
Vespa Px 150 .. on the Piaggio Vespa PX 150, as well as on the LML Star 150. First, place the central stand and lift the front wheel off the ground; then disconnect.. …
How do you replace the exhaust pipe of the Piaggio Vespa PX 150?
How do you replace the exhaust pipe of the Piaggio Vespa PX 150?
Vespa Px 150 It will be possible to replace the exhaust of the Piaggio Vespa PX 150 by loosening the screws that secure the rear wheel covering panel on the left …
How do you replace the gearbox oil of the Piaggio Vespa PX 150?
How do you replace the gearbox oil of the Piaggio Vespa PX 150?
Vespa Px 150 The oil change of the Piaggio Vespa PX 150 transmission can be carried out by loosening the drain plug of the transmission case, which will be locate…

How to replace the headlight bulbs on a Suzuki GSXR 600?

In this tutorial, you will see how to replace the headlight bulbs on a Suzuki GSXR 600, an extremely simple and quick operation. First, ensure that the key is not inserted, then unscrew the two indicated screws and separate the dashboard from the support. Next, disconnect the power connectors of the bulbs, remove the rubber caps, and unclip the metal clips to extract the bulbs from their respective housings. At this point, you can insert the replacements, avoiding touching the glass directly with your bare hands, and follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos