Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Mudguard on the Piaggio Vespa PX 150 - LML Star 150

Model: Piaggio Vespa Px 150
Part:

Video tutorial

This guide explains how to remove and replace the front mudguard on the Piaggio Vespa PX 150, as well as on the LML Star 150. First, place the central stand and lift the front wheel off the ground; then disconnect the handlebars from the fork by removing all the wiring and the small bearing from the fork, as shown in the video.

At this point, unscrew the screws of the mudguard and remove the chrome trim; then take off the mudguard from the fork and replace it with the new one, applying the reverse procedure!


Updated on 13 August 2026 by ScegliAuto


Related tutorials

How to Replace the Front Suspension on a Piaggio Vespa PX 150 - LML Star 150
How to Replace the Front Suspension on a Piaggio Vespa PX 150 - LML Star 150
Vespa Px 150 .. on a Piaggio Vespa PX 150, as well as on an LML Star 150. First, place the central stand and begin to unscrew the nuts securing the front wheel.. …
How do you replace the exhaust pipe of the Piaggio Vespa PX 150?
How do you replace the exhaust pipe of the Piaggio Vespa PX 150?
Vespa Px 150 It will be possible to replace the exhaust of the Piaggio Vespa PX 150 by loosening the screws that secure the rear wheel covering panel on the left …
How do you replace the gearbox oil of the Piaggio Vespa PX 150?
How do you replace the gearbox oil of the Piaggio Vespa PX 150?
Vespa Px 150 The oil change of the Piaggio Vespa PX 150 transmission can be carried out by loosening the drain plug of the transmission case, which will be locate…

How to Dismantle the TM Racing KZ R1 Engine?

To dismantle the TM Racing KZ R1 engine, first remove the engine from its housing by unscrewing the bolts that secure it to the mounts and disconnecting all pipes and connectors attached to it. Once the engine block is freed, unscrew the bolts that secure the cylinder at the top of the bike. This will allow you to remove the piston from its connecting rod, and then you can unscrew the bolts that hold the two half-cases of the engine together. You can then remove and replace all internal components, reassembling everything afterwards.

Watch the video!


by ScegliAuto

More videos