Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Front Headlight Bulb on Yamaha Xmax 250

Model: Yamaha Xmax 250
Part: Headlight bulb

Video tutorial

In this video tutorial, you will learn how to remove and replace the front headlight bulb of a Yamaha Xmax 250. First, remove the front fairing: use a star screwdriver to unscrew the three screws. Once removed, you will find a support near the headlight that you will need to detach and disconnect the electrical connector.

Now remove the affected bulb, knowing that the low beam and high beam socket for this scooter is H4. Replace only with original and high-quality spare parts to ensure driving safety!


Updated on 20 March 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on the Yamaha XMax 250
How to Reset the Service Light on the Yamaha XMax 250
Xmax 250 You can manually reset the service light on the dashboard of your Yamaha XMax 250 without any difficulty, even if you are on your own. Follow the ste…
Replacing the Belt and Rollers of the Yamaha Xmax 250
Replacing the Belt and Rollers of the Yamaha Xmax 250
Xmax 250 In this brief and simple guide, see how to dismantle and replace the belt and rollers of the variator on the Yamaha Xmax 250 scooter. First, place yo…
How to Reset the V-Belt Light on the Yamaha Xmax 250?
How to Reset the V-Belt Light on the Yamaha Xmax 250?
Xmax 250 To reset the V-Belt light on the Yamaha Xmax 250, you need to disconnect the connector related to the sensor that monitors the wear of the belt. This…

Replacing the Rear Brake Pads of the BMW G310 GS

Follow these brief instructions to remove and replace the rear brake pads (this also applies to the front ones) of the BMW G310 GS motorcycle. First, place the bike on a stand and start by removing the pin and the clip from the rear brake caliper; then remove the old brake pads as shown in the video. Next, clean the caliper of any residual dirt, install the new original brake pads, and secure the pin and clip to lock everything in place, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos