Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Let's briefly see the steps that will allow us to disassemble and replace the low beam and high beam bulb of the front headlight of the Yamaha Xmax 250 scooter. First of all, we put the scooter on the center stand and start by removing the plastic cover located on the front part; then we unscrew the fixing screws of the front headlights to remove it, as shown in the video. At this point, we disconnect the electrical connector of the lights to remove them, replacing them with new ones; we respect the bulb attachment and check the operation before reassembling everything!

Posted on 3 October 2024 by ScegliAuto

Video tutorial

Related tutorials

Replacing Front Headlight Bulb on Yamaha Xmax 250
Replacing Front Headlight Bulb on Yamaha Xmax 250
Xmax 250 In this video tutorial, you will learn how to remove and replace the front headlight bulb of a Yamaha Xmax 250. First, remove the front fairing: use …
How to Replace the Front Indicator Bulb on a Yamaha Xmax 250
How to Replace the Front Indicator Bulb on a Yamaha Xmax 250
Xmax 250 To replace the front indicator bulb on the Yamaha Xmax 250, loosen the bolts securing the side panel corresponding to the bulb to be replaced: this p…
Replacing the Dipped Beam on a Yamaha Xmax 250
Replacing the Dipped Beam on a Yamaha Xmax 250
Xmax 250 This is a very simple operation: use a Phillips screwdriver to remove the three screws from the front casing (the last one is located at the bottom).…

How to Replace the Battery in a Yamaha FZ6?

Replacing the battery in the Yamaha FZ6, as shown in this tutorial, is a very simple and quick operation. First, ensure that the key is not inserted, then remove the rider's seat and, using a 10mm socket spanner, loosen the bolt on the tank hinge. Next, unscrew both the front bolts and the fairing mounting bolts, lift the entire tank, and disconnect both terminals starting with the negative. At this point, you can remove the upper plastic plate, take the battery out of its housing, and fit the replacement.

Watch the video!


by ScegliAuto

More videos