Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Brake Pads on a Yamaha Ténéré

Model: Yamaha Tenere 700
Part: Brake pads

Video tutorial

The procedure for replacing the brake pads on the Yamaha Ténéré is the same for both the front and rear brakes. You need to remove the pin from the top of the caliper so that the old pads can be slid out. At this point, it will be possible to insert the new pads and secure them inside the caliper by reinserting the pin. Once the procedure has been completed for one wheel, it can be repeated for the other wheel.

After replacing all the pads, check that the brakes are functioning correctly.


Updated on 3 May 2026 by ScegliAuto


Related tutorials

How to replace the rear brake pads on a Yamaha Ténéré 700?
How to replace the rear brake pads on a Yamaha Ténéré 700?
Tenere 700 To replace the rear brake pads on a Yamaha Ténéré 700, you need to unscrew the bolt that secures the brake caliper to the disc corresponding to the p…
How to Replace the Rear Brake Pads on a Yamaha Tenere 700
How to Replace the Rear Brake Pads on a Yamaha Tenere 700
Tenere 700 To replace the rear brake pads on a Yamaha Tenere 700, you will need a screwdriver and a hammer to remove the pin to which the pads are attached. Pos…
How to Remove the Front Wheel of a Yamaha Tenere 700
Tenere 700 Today's tutorial will show you the main steps on how to remove and replace the front wheel of the Yamaha Tenere 700 enduro motorcycle. First, place t…

How to Clean the Throttle Body on a Piaggio Beverly

In today's video, see how to clean the throttle body on a Piaggio Beverly. This operation applies to all models of the Beverly from 125 to 500 over various years. First, remember to work only with a cold engine to avoid unpleasant burns. Next, remove the seat by unscrewing the appropriate fastening clips. Once done, proceed to remove the scooter's body; find and remove the appropriate fastening clips. At this point, you can carry out the work in question and then reassemble everything as it was.

Watch the video!


by ScegliAuto

More videos