Do it yourself
Frequently asked questions about cars and motorcycles

Model: Yamaha Mt 01
Part:

Let’s discover the steps to remove the fuel tank on the Yamaha MT-01 motorcycle in simple and quick steps. First, unscrew the screws securing the plastic cover of the tank located at the top using a Torx screwdriver; then remove the seat and unscrew the upper and lower fixing screws to detach the tank. At this point, lift the tank upwards and disconnect the two fuel hoses as well as the electrical connector; apply the reverse procedure for reassembly!

Updated on 9 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Mt 01 In this tutorial, you will see how to change the engine oil in the Yamaha MT-01, a very simple and quick operation. First, wait until the engine is c…
Mt 01 In this tutorial, you will see how to change the engine oil in the Yamaha MT-01, a very simple and quick operation. First, ensure that the engine is …
Mt 01 In this tutorial, you will see how to change the engine oil in the Yamaha MT-01, a very simple and quick operation. First, ensure the engine is suffi…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos