Do it yourself
Frequently asked questions about cars and motorcycles

Model: Yamaha Xt 250
Part: Brake pads

In this guide, we will look at the instructions that will allow you to remove and replace the front brake pads on the Yamaha XT 250 enduro motorcycle. First, move to the front of the bike and start by unscrewing the two bolts securing the front brake caliper using a socket spanner; then remove the caliper and extract the old brake pads inside, as shown in the video. At this point, clean the caliper of any residual dirt and insert the new brake pads; then refit the brake caliper!

Updated on 11 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Xt 250 This brief procedure will show us how to perform the regular maintenance of changing the engine oil and oil filter on the Yamaha XT 250 enduro motorc…
Xt 250 In order to adjust the clock of the Yamaha XT 250, you need to turn on the instrument panel and then hold down the buttons located at the top left of…
Xt 250 This tutorial shows how to set the time on the Yamaha XT 250, a very simple and quick operation to perform, for example, after disconnecting the batt…

How to Replace the Engine Oil and Oil Filter on an Aprilia RSV 1000

This short video will show you how to carry out the routine maintenance service by replacing the engine oil and oil filter on the Aprilia RSV 1000 motorcycle. First, place your motorcycle on the centre stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then use the appropriate tool to unscrew and remove the oil filter, replacing the cartridge with a new one as shown in the video. Finally, unscrew the filler screw and top up by pouring in the suitable oil for your engine!

Watch the video!


by ScegliAuto

More videos