Do it yourself
Frequently asked questions about cars and motorcycles
In today's tutorial video, you will see the main instructions for replacing the coolant in the KTM SX-F 350 enduro bike. First, remove the plastic fairing on the right by unscrewing the fixing screws; then unscrew the coolant filler cap and proceed to drain the system by unscrewing the bleed screw located on the water pump casing, as shown in the video. At this point, top up with the new coolant suitable for your radiator, following the video to the end!

Updated on 16 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Sx F 350 .. and replace the water pump on the KTM SX-F 350 enduro bike. First, place the bike on a stand and start draining the engine coolant by disconnecting.. …
Sx F 350 .. and replace the water pump gasket on the KTM SX-F 350 enduro bike. First, place the bike on a stand and start removing the side cover of the water pump.. …
Sx F 350 .. the routine maintenance service on the Ktm SX-F 350 enduro bike. First, remove the oil drain bolt located under the engine and allow the oil to drain.. …

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos