Do it yourself
Frequently asked questions about cars and motorcycles

Model: Ktm Sx F 350
Part: Pump

In this brief guide, we will see the instructions that will allow us to disassemble and replace the water pump on the KTM SX-F 350 enduro bike. First, place the bike on a stand and start draining the engine coolant by disconnecting the hose or unscrewing the drain screw; then unscrew the screws of the water pump to remove it, as shown in the video. Replace the water pump with the new one, then top up with the new coolant; start the engine and top up again if necessary.

Posted on 24 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Sx F 350 .. and replace the water pump gasket on the KTM SX-F 350 enduro bike. First, place the bike on a stand and start removing the side cover of the water pump.. …
Sx F 350 .. for replacing the coolant in the KTM SX-F 350 enduro bike. First, remove the plastic fairing on the right by unscrewing the fixing screws; then.. …
Sx F 350 .. remove and replace the spark plug on the KTM SX-F 350 enduro bike. First, place the bike on a stand and start by removing the rider's seat and the fuel.. …

How to Remove the Rear Wheel on the BMW G650 GS?

In this tutorial, you will see how to remove the rear wheel on the BMW G650 GS, a very simple operation. First, lift the motorcycle from the central area using a stand or a jack, then undo the right nut with a 24 mm socket and the left one with a 19 mm spanner. Once done, using a Torx T40 key, unscrew the two chain tensioner bolts exactly half a turn each, until you loosen the tension. Finally, push the wheel towards the inside of the motorcycle, remove the chain from the sprocket, and extract the inner pin using a hammer.

Watch the video!


by ScegliAuto

More videos