Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Ktm Sx F 350

Today, we will discover the instructions that will allow us to disassemble and replace the water pump gasket on the KTM SX-F 350 enduro bike. First, place the bike on a stand and start removing the side cover of the water pump located at the bottom right (by unscrewing the fixing screws); then, carefully remove the water pump gasket with a thin, sharp tool, as shown in the video. Finally, insert the new gasket in the correct orientation, reattach the cover, and top up with new coolant.

Posted on 7 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Water Pump on the KTM SX-F 350
How to Replace the Water Pump on the KTM SX-F 350
Sx F 350 .. and replace the water pump on the KTM SX-F 350 enduro bike. First, place the bike on a stand and start draining the engine coolant by disconnecting.. …
How to Replace the Coolant in the KTM SX-F 350
How to Replace the Coolant in the KTM SX-F 350
Sx F 350 .. for replacing the coolant in the KTM SX-F 350 enduro bike. First, remove the plastic fairing on the right by unscrewing the fixing screws; then.. …
How to Replace the Spark Plug on a KTM SX-F 350
Sx F 350 .. remove and replace the spark plug on the KTM SX-F 350 enduro bike. First, place the bike on a stand and start by removing the rider's seat and the fuel.. …

How to Reset the Engine Oil Light on a Yamaha XMax 250

This short video demonstrates the procedure to reset the engine oil light on a Yamaha XMax 250 scooter. The operation is very simple and quick; first, insert the motorcycle key into the designated slot and turn it to the first position to power on the instrument panel without starting the vehicle. At this point, you will see the light on the display; simply press the "oil change" button located at the centre of the motorcycle's speedometer and hold it until the light stops flashing. The operation will then be complete; to verify success, turn off and then turn on the instrument panel.

Watch the video!


by ScegliAuto

More videos