Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the front brake pads on the Yamaha V-Star, you need to loosen the bolts that secure the caliper to the disc; once the caliper mounting bolts are loosened, you can remove the caliper from the disc so that the pads inside can be extracted. Once the old pads have been completely removed, you can position the new ones inside the caliper so that it can be secured to the disc with the bolts. After it has been secured, check that the brake functions correctly.

Updated on 16 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Air Filter on a Yamaha V Star 650
How to Replace the Air Filter on a Yamaha V Star 650
V Star 650 .. To replace the air filter on a Yamaha V Star 650, loosen the bolts securing the chrome cover located on the right side of the bike, just below.. …
How to Replace the Clutch in a Yamaha V Star 650?
How to Replace the Clutch in a Yamaha V Star 650?
V Star 650 .. To replace the clutch in a Yamaha V Star 650, loosen the screws securing the cover on the right side of the bike, at the lower front. Once.. …
How do you replace the muffler on the Yamaha V-Star 650?
How do you replace the muffler on the Yamaha V-Star 650?
V Star 650 .. To replace the exhaust of the Yamaha V-Star 650, you will need to loosen all the screws that secure the exhaust tip to its housing: this will.. …

How to Turn Off the "V-Belt" Warning Light on a Yamaha X-MAX 400 Scooter?

In this tutorial, learn how to turn off the "V-Belt" warning light on the Yamaha X-MAX scooter's instrument panel, a very simple and quick operation. Before doing this, ensure you have completed the required maintenance, specifically replacing the drive belt. Start by inserting the key and turning on the ignition, then open the small right glove compartment and unscrew the screw for the upper cover. Once removed, locate the white connector with a jumper attached, disconnect it, wait about 10 seconds, and reconnect it. If successful, the warning light will disappear.

Watch the video!


by ScegliAuto

More videos