Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Yamaha
    3. : Yzf 250

Model: Yamaha Yzf 250
Part: Engine oil

This guide outlines the steps to remove and replace the engine oil and oil filter on the Yamaha YZF 250. First, warm up the engine for a few minutes, then unscrew the oil drain bolt located under the engine, allowing the oil to drain into a container for about ten minutes. Next, unscrew the oil filter cartridge and replace it with a new one, as shown in the video. Finally, unscrew the filler cap to pour in the new engine oil, filling it up to the maximum level!

Updated on 16 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Clutch on a Yamaha YZF 250
How to Replace the Clutch on a Yamaha YZF 250
Yzf 250 To replace the clutch on a Yamaha YZF 250, you need to loosen the screws that secure the clutch cover, located on the right side of the vehicle. Once…

How to Remove the Engine from a KTM EXC 300?

To remove the engine from the KTM EXC 300, you need to take out the engine block from its housing by unscrewing the bolts that secure it to the supports. Once the engine block is removed, unscrew the bolts that secure the cylinder at the top, then proceed to remove the side casings. Underneath, you will find the piston and other internal components, such as the clutch. The necessary parts can now be replaced, and you can subsequently reassemble all the components that were removed earlier.

Watch the video!


by ScegliAuto

More videos