|
Do it yourself
| |||
| ||||
How to Change the Engine Oil on a Yamaha FZ6
Model: Yamaha Fz6
Video tutorial
To replace the engine oil on a Yamaha FZ6, loosen the drain plug of the oil tank, which is located on the left side of the bike, just below the circular cover. Once the plug is open, allow the oil in the tank to drain completely; when it has finished, close the plug and remove the oil filter located to the right of the cover so that it can also be replaced. After the replacement, top up the oil by pouring it through the drain hole, using a tube or a funnel.
Updated on 20 May 2026 by ScegliAuto
Related tutorials
Fz6
In today’s tutorial, see how to replace the engine oil and oil filter while performing routine maintenance on a Yamaha FZ6 and FZ6 Fazer. First, posi…
Fz6
In this tutorial, you can see how to change the engine oil in the Yamaha FZ6, a very simple and quick operation to perform every 12 months. First, en…
Fz6
In this tutorial, you will see how to change the engine oil in a Yamaha FZ6, a very simple and quick operation to perform every 12 months. First, wai…
|
Replacing the Rear Brake Pads of the BMW G310 GS
Follow these brief instructions to remove and replace the rear brake pads (this also applies to the front ones) of the BMW G310 GS motorcycle. First, place the bike on a stand and start by removing the pin and the clip from the rear brake caliper; then remove the old brake pads as shown in the video. Next, clean the caliper of any residual dirt, install the new original brake pads, and secure the pin and clip to lock everything in place, following the video tutorial to the end! by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.006
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
