Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Yamaha Xmax 300
Part:

To replace the belt on the Yamaha Xmax 300, you need to loosen the bolts securing the cover at the rear wheel, on the left side. Once the bolts are unscrewed, you can open the cover and access the components underneath: here you will find the variator and the clutch, around which the belt is located. The belt can be removed after loosening the central pins of the variator and the clutch, which must then be removed from their housing. This way, you can insert the new belt, reassembling all previously removed components.

Updated on 26 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Drive Belt on a Yamaha Xmax 300
How to Replace the Drive Belt on a Yamaha Xmax 300
Xmax 300 Below are the instructions that will allow you to remove and replace the drive belt on the Yamaha Xmax 300 scooter. First, place the scooter on the s…
Reset the belt change warning on the Yamaha Xmax 300.
Reset the belt change warning on the Yamaha Xmax 300.
Xmax 300 These short and simple instructions will show us how to reset the transmission belt change on the Yamaha Xmax 300 scooter. First of all, we put the s…
Resetting the Belt Change Warning Light on a Yamaha Xmax 300
Resetting the Belt Change Warning Light on a Yamaha Xmax 300
Xmax 300 This guide will show you how to reset the belt change warning light on the Yamaha Xmax 300 scooter. First, place the scooter on its centre stand and …

How to replace the engine oil in the Kawasaki Versys 1000?

As we can see in this tutorial, replacing the motor oil in the Kawasaki Versys 1000 is an extremely simple and fast operation. First of all, make sure that the engine is cool enough, then position a container under the motorcycle and, using a socket wrench, unscrew the drain plug. Wait for all the oil in the system to completely drain out, remove the lower front cover and unscrew the old filter. At this point, we can tighten the replacement, reassemble everything and pour in the new oil through the appropriate hole.

Watch the video!


by ScegliAuto

More videos