Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Yamaha Virago 535
Part: Battery

In this video, we will see how to remove and replace the battery on a Yamaha Virago 535 motorcycle, following these simple and quick steps. First, remove the seat of your motorcycle by unlocking it with the key; then disconnect the battery located underneath by unscrewing the bolts of the two terminals (positive and negative) with a socket spanner, as shown in the video. At this point, remove the battery and replace it with a new one of the correct type and the same amperage; apply the reverse procedure for reassembly!

Updated on 12 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Air Filter on a Yamaha Virago 535?
How to Replace the Air Filter on a Yamaha Virago 535?
Virago 535 You can replace the air filter on the Yamaha Virago 535 by loosening the screws that secure the cover of the filter box: this is located on the left …
How to Change the Engine Oil in a Yamaha Virago 535?
How to Change the Engine Oil in a Yamaha Virago 535?
Virago 535 In this tutorial, you will see how to change the engine oil in a Yamaha Virago 535, a very simple and quick operation. First, ensure the engine is co…
How to Replace the Air Filter on the Yamaha Virago 535
How to Replace the Air Filter on the Yamaha Virago 535
Virago 535 Today's guide will show you, in simple and quick steps, how to remove and replace the air filter of the engine on the Yamaha Virago 535 motorcycle. F…

How to Remove the Rear Wheel on the BMW G650 GS?

In this tutorial, you will see how to remove the rear wheel on the BMW G650 GS, a very simple operation. First, lift the motorcycle from the central area using a stand or a jack, then undo the right nut with a 24 mm socket and the left one with a 19 mm spanner. Once done, using a Torx T40 key, unscrew the two chain tensioner bolts exactly half a turn each, until you loosen the tension. Finally, push the wheel towards the inside of the motorcycle, remove the chain from the sprocket, and extract the inner pin using a hammer.

Watch the video!


by ScegliAuto

More videos