|
Do it yourself
| |||
| ||||
|
Model: Yamaha Virago 535
In this tutorial, you will see how to change the engine oil in a Yamaha Virago 535, a very simple and quick operation. First, ensure the engine is cold enough. Then, position a container underneath, locate the drain bolt, and loosen it using a 17 mm socket spanner. Allow all the oil in the system to drain out. Next, open the filter housing with a 5 mm hex key and insert the replacement. At this point, reassemble everything and pour in the new oil through the top hole.
Updated on 15 September 2026 by ScegliAuto
Video tutorial
Related tutorials
Virago 535
In this video, we will see how to remove and replace the battery on a Yamaha Virago 535 motorcycle, following these simple and quick steps. First, re…
Virago 535
To change the engine oil on the Yamaha Virago, loosen the drain plug located at the bottom of the bike. Once this plug is removed, collect all the us…
Virago 535
Today's guide will show you, in simple and quick steps, how to remove and replace the air filter of the engine on the Yamaha Virago 535 motorcycle. F…
|
How to Remove the Engine from a KTM EXC 300?
To remove the engine from the KTM EXC 300, you need to take out the engine block from its housing by unscrewing the bolts that secure it to the supports. Once the engine block is removed, unscrew the bolts that secure the cylinder at the top, then proceed to remove the side casings. Underneath, you will find the piston and other internal components, such as the clutch. The necessary parts can now be replaced, and you can subsequently reassemble all the components that were removed earlier. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.030
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |