Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial, you can see how to replace the coolant in the Yamaha MT-09, a very simple operation. First, wait for the engine to be completely cold, then unscrew the two indicated screws and remove the expansion tank. Next, go to the opposite side, remove the bolt from the drain hole and let all the fluid inside the radiator flow out. At this point, you can unscrew the upper filler cap by removing the corresponding lock and insert the new coolant. Always refer to the manual for your model regarding the amount of fluid to use.

Updated on 18 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Battery on a Yamaha MT-09
How to Replace the Battery on a Yamaha MT-09
Mt 09 Below are the steps to remove and replace the battery on a Yamaha MT-09 motorcycle, following the instructions provided. First, place your motorcycle…
How to Replace the Air Filter on the Yamaha MT 09
How to Replace the Air Filter on the Yamaha MT 09
Mt 09 This guide briefly outlines the steps to remove and replace the air filter of the Yamaha MT 09 motorcycle engine. First, place the bike on a stand an…
How to Replace the Front Brake Pads on a Yamaha MT-09
How to Replace the Front Brake Pads on a Yamaha MT-09
Mt 09 Let’s briefly go through the steps to remove and replace the front brake pads on the Yamaha MT-09. First, place the bike on a stand and start unscrew…

How to Replace the Clutch on a Triumph Speed Triple?

To replace the clutch on a Triumph Speed Triple, loosen the bolts securing the covers of the three casings located on the right side of the bike, namely the starter motor, the engine, and then the clutch. Once these covers are removed, you can access the bolts securing the clutch, unscrew them, and slide the clutch plates out of their housing. This will allow you to insert the new plates into their place, securing everything with the appropriate bolts; finally, reinstall all the casings.

Watch the video!


by ScegliAuto

More videos