Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Yamaha Mt 03
Part: Brake pads

Today's guide will help you discover the steps to remove and replace the front brake pads on the Yamaha MT-03 motorcycle. First, place your bike on a stand and start unscrewing the bolts securing the front brake caliper to remove it from the disc. Next, use pliers to remove the retaining clip for the pads, then take the pads out of the caliper as shown in the video. At this point, press the piston back in, clean the caliper of dirt, and refit the new (high-quality) pads!

Updated on 23 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil in a Yamaha MT-03?
How to Change the Engine Oil in a Yamaha MT-03?
Mt 03 In this tutorial, you will see how to change the engine oil in a Yamaha MT-03, a very simple and quick operation. First, ensure that the engine is co…
How to replace the air filter on the Yamaha MT-03
How to replace the air filter on the Yamaha MT-03
Mt 03 Here are the main instructions for removing and replacing the engine air filter on the Yamaha MT-03, following these simple steps. First, place your …
How to remove and replace the headlight bulb on the Yamaha MT-03
How to remove and replace the headlight bulb on the Yamaha MT-03
Mt 03 This guide shows how to remove and replace the headlight bulb on the Yamaha MT-03 motorcycle, following the instructions below. First, place your mot…

How to Replace the Front Headlight on the Husqvarna 701?

In this tutorial, you will see how to replace the front headlight on the Husqvarna 701, a very simple and quick operation. First, ensure that the key is not inserted, then position yourself in front of the motorcycle, locate the four bolts on either side of the headlamp, and unscrew them using a Torx T30 key. Next, pull the entire assembly towards you, separate it from the support, and disconnect the power connector. At this point, you can separate the headlight from the panel, position the replacement, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos